HS 76Metals · Japan

HS Code for Aluminium - Import into Japan

Duty and tax snapshot for importing metals (HS 76) into Japan. Typical MFN duty ~4%, JCT 10% on CIF + duty. Decision-support only - confirm the 10-digit line and preferential status with your broker.

Typical duty

JCT

10%

Total taxes / CIF

14.4%

Worked landed-cost example

USD 120,000 FOB parcel of metals (HS 76) shipped to Japan.

FOB valueUSD 120,000

Origin chargesUSD 1,800

FreightUSD 9,600

InsuranceUSD 600

CIFUSD 132,000

Import duty @ 4%USD 5,280

JCT @ 10%USD 13,728

Destination inlandUSD 2,400

Landed cost ≈ USD 153,408

Run your own numbers in the Landed Cost by HS & Country tool.

Sample HS codes

Code	Description
2606.00	Aluminium ores and concentrates (bauxite)
2818.20	Aluminium oxide (alumina), other than artificial corundum
7601.10	Aluminium, unwrought, not alloyed (P1020A)
7601.20	Aluminium alloys, unwrought (6000/7000 series billets)
7604.10	Aluminium bars, rods, profiles - not alloyed
7604.21	Aluminium hollow profiles - alloyed (extrusions)
7606.11	Aluminium plates, sheets, strip > 0.2mm
7602.00	Aluminium waste and scrap (Taint Tabor, Tense, Twitch)

Japan duty regime

MFN tariffs on a mix of ad valorem and specific rates. Preferential rates under CPTPP, RCEP, Japan-EU EPA, Japan-US Trade Agreement, Japan-UK CEPA and ASEAN JAEPA.

Customs notes

· Japan uses a 9-digit Statistical Code (HS 6 + 3 national digits) administered by Customs and METI.
· NACCS is the electronic customs declaration system used at all ports and airports.
· AEO (Authorised Economic Operator) status gives fast-track clearance and deferred duty payment.
· Consumption tax base = CIF + customs duty. Registered importers can reclaim JCT as input tax.

Frequently asked questions

What is the typical import duty on metals (HS 76) into Japan?

Japan applies an MFN duty of about 4% on HS chapter 76 at the 6-digit line. National tariff schedules add 2–4 further digits, so the exact rate can shift once you confirm the 8- or 10-digit code. Preferential rates under FTAs (MFN tariffs on a mix of ad valorem and specific rates) may reduce this to 0% for qualifying origins.

How is JCT calculated on imports of metals in Japan?

Japan charges JCT at 10% on the CIF value plus duty. Consumption tax on CIF + duty

What is the landed cost of a USD 120,000 FOB shipment of metals into Japan?

On a USD 120,000 FOB parcel with ~8% freight and 0.5% insurance, CIF works out to USD 132,000. Applying 4% duty and 10% JCT brings total taxes to about USD 19,008 (~14.4% of CIF). Landed at buyer's warehouse ≈ USD 153,408.

Which HS code should I use for metals in Japan?

Start with the 6-digit international HS heading - for example 2606.00 (Aluminium ores and concentrates (bauxite)). Japan customs then requires the full national code (8- to 10-digit national tariff line). Confirm the exact line with your licensed customs broker before filing.

Which Incoterm is best for shipping metals to Japan?

Most importers into Japan prefer CIF or CFR for sea freight so the seller arranges main-carriage transport, while retaining control of destination clearance. DDP shifts import duty and JCT to the seller - attractive to buyers but often priced with a risk premium. Compare all 11 Incoterms with our Landed Cost by HS & Country tool.

What documents does Japan customs need to clear HS 76?

Japan uses a 9-digit Statistical Code (HS 6 + 3 national digits) administered by Customs and METI. Regulated commodities may also require a health certificate, phytosanitary certificate or import licence depending on the exact HS line.

Metals into other destination markets

Compare duty, JCT and landed cost for metals across every market we cover.

Other commodities imported into Japan

Landed-cost pages for every HS commodity guide when the destination is Japan.

Deeper pricing, grade and lane detail for HS Code for Aluminium (Chapter 76) shipments to and from Japan. Each hub covers specifications, benchmarks and the calculators that price a cargo.

Aluminium →

Top importer

HS 7601