SSLT Global
HS 76Metals · United States

HS Code for Aluminium - Import into United States

Duty and tax snapshot for importing metals (HS 76) into United States. Typical MFN duty ~3%, Federal VAT 0% on CIF. Decision-support only - confirm the 10-digit line and preferential status with your broker.

Typical duty
3%
Federal VAT
0%
Total taxes / CIF
3.3%

Worked landed-cost example

USD 120,000 FOB parcel of metals (HS 76) shipped to United States.

FOB valueUSD 120,000
Origin chargesUSD 1,800
FreightUSD 9,600
InsuranceUSD 600
CIFUSD 132,000
Import duty @ 3%USD 3,960
MPF (0.3464%)USD 457
Federal VAT @ 0%USD 0
Destination inlandUSD 2,400
Landed cost ≈ USD 138,817
Run your own numbers in the Landed Cost by HS & Country tool.

Sample HS codes

CodeDescription
2606.00Aluminium ores and concentrates (bauxite)
2818.20Aluminium oxide (alumina), other than artificial corundum
7601.10Aluminium, unwrought, not alloyed (P1020A)
7601.20Aluminium alloys, unwrought (6000/7000 series billets)
7604.10Aluminium bars, rods, profiles - not alloyed
7604.21Aluminium hollow profiles - alloyed (extrusions)
7606.11Aluminium plates, sheets, strip > 0.2mm
7602.00Aluminium waste and scrap (Taint Tabor, Tense, Twitch)
United States duty regime

HTSUS (Harmonized Tariff Schedule of the United States) - 10 digits. MFN column-1 rates for WTO members, column-2 for non-normal-trade-relations countries. Preferential rates under USMCA, KORUS, CAFTA-DR, US-Israel, US-Australia and GSP (partial). Section 301 tariffs of 7.5%-25% apply on many Chinese-origin goods; Section 232 on steel/aluminium.

Customs notes
  • · HTSUS is 10 digits. First 6 align with WCO HS; digits 7-8 are US tariff sub-headings; 9-10 are statistical.
  • · MPF (Merchandise Processing Fee): 0.3464% of entered value, min $32.71, max $634.62 per formal entry (2025 rates - adjusted annually).
  • · HMF (Harbor Maintenance Fee): 0.125% of value, ocean imports only, no minimum or maximum.
  • · Section 301 tariffs: 7.5%-25%+ on many Chinese-origin goods across 4 lists. Section 232: 25% steel, 10% aluminium (subject to country-specific quotas and exclusions).

Frequently asked questions

What is the typical import duty on metals (HS 76) into United States?

United States applies an MFN duty of about 3% on HS chapter 76 at the 6-digit line. National tariff schedules add 2–4 further digits, so the exact rate can shift once you confirm the 8- or 10-digit code. Preferential rates under FTAs (HTSUS (Harmonized Tariff Schedule of the United States) - 10 digits) may reduce this to 0% for qualifying origins.

How is Federal VAT calculated on imports of metals in United States?

United States charges Federal VAT at 0% on the CIF value. No federal VAT. MPF applies (max USD 634.62).

What is the landed cost of a USD 120,000 FOB shipment of metals into United States?

On a USD 120,000 FOB parcel with ~8% freight and 0.5% insurance, CIF works out to USD 132,000. Applying 3% duty and 0% Federal VAT brings total taxes to about USD 4,417 (~3.3% of CIF). Landed at buyer's warehouse ≈ USD 138,817.

Which HS code should I use for metals in United States?

Start with the 6-digit international HS heading - for example 2606.00 (Aluminium ores and concentrates (bauxite)). United States customs then requires the full national code (8- to 10-digit national tariff line). Confirm the exact line with your licensed customs broker before filing.

Which Incoterm is best for shipping metals to United States?

Most importers into United States prefer CIF or CFR for sea freight so the seller arranges main-carriage transport, while retaining control of destination clearance. DDP shifts import duty and Federal VAT to the seller - attractive to buyers but often priced with a risk premium. Compare all 11 Incoterms with our Landed Cost by HS & Country tool.

What documents does United States customs need to clear HS 76?

HTSUS is 10 digits. First 6 align with WCO HS; digits 7-8 are US tariff sub-headings; 9-10 are statistical. Regulated commodities may also require a health certificate, phytosanitary certificate or import licence depending on the exact HS line.

Metals into other destination markets

Compare duty, Federal VAT and landed cost for metals across every market we cover.

Other commodities imported into United States

Landed-cost pages for every HS commodity guide when the destination is United States.

Deeper pricing, grade and lane detail for HS Code for Aluminium (Chapter 76) shipments to and from United States. Each hub covers specifications, benchmarks and the calculators that price a cargo.

Related tools & guides

Duty and tax rates compiled from WCO HS, WTO IDB and United States customs. Provided for decision-support only - confirm the 10-digit tariff line, preferential origin status and any anti-dumping / safeguard duties with a licensed customs broker before acting.