HS 7219Metals · Japan

HS Code for Stainless Steel Flat Products - Import into Japan

Q: What is the typical import duty on metals (HS 7219) into Japan?

Japan applies an MFN duty of about 5% on HS chapter 7219 at the 6-digit line. National tariff schedules add 2–4 further digits, so the exact rate can shift once you confirm the 8- or 10-digit code. Preferential rates under FTAs (MFN tariffs on a mix of ad valorem and specific rates) may reduce this to 0% for qualifying origins.

Q: How is JCT calculated on imports of metals in Japan?

Japan charges JCT at 10% on the CIF value plus duty. Consumption tax on CIF + duty

Q: What is the landed cost of a USD 120,000 FOB shipment of metals into Japan?

On a USD 120,000 FOB parcel with ~8% freight and 0.5% insurance, CIF works out to USD 132,000. Applying 5% duty and 10% JCT brings total taxes to about USD 20,460 (~15.5% of CIF). Landed at buyer's warehouse ≈ USD 154,860.

Q: Which HS code should I use for metals in Japan?

Start with the 6-digit international HS heading - for example 7219.13 (SS hot-rolled coil, thickness 3-4.75mm). Japan customs then requires the full national code (8- to 10-digit national tariff line). Confirm the exact line with your licensed customs broker before filing.

Q: Which Incoterm is best for shipping metals to Japan?

Most importers into Japan prefer CIF or CFR for sea freight so the seller arranges main-carriage transport, while retaining control of destination clearance. DDP shifts import duty and JCT to the seller - attractive to buyers but often priced with a risk premium. Compare all 11 Incoterms with our Landed Cost by HS & Country tool.

Q: What documents does Japan customs need to clear HS 7219?

Japan uses a 9-digit Statistical Code (HS 6 + 3 national digits) administered by Customs and METI. Regulated commodities may also require a health certificate, phytosanitary certificate or import licence depending on the exact HS line.

Duty and tax snapshot for importing metals (HS 7219) into Japan. Typical MFN duty ~5%, JCT 10% on CIF + duty. Decision-support only - confirm the 10-digit line and preferential status with your broker.

Typical duty

JCT

10%

Total taxes / CIF

15.5%

Worked landed-cost example

USD 120,000 FOB parcel of metals (HS 7219) shipped to Japan.

FOB valueUSD 120,000

Origin chargesUSD 1,800

FreightUSD 9,600

InsuranceUSD 600

CIFUSD 132,000

Import duty @ 5%USD 6,600

JCT @ 10%USD 13,860

Destination inlandUSD 2,400

Landed cost ≈ USD 154,860

Run your own numbers in the Landed Cost by HS & Country tool.

Sample HS codes

Code	Description
7219.13	SS hot-rolled coil, thickness 3-4.75mm
7219.14	SS hot-rolled coil, thickness < 3mm
7219.34	SS cold-rolled coil, thickness 0.5-1mm
7219.35	SS cold-rolled coil, thickness < 0.5mm

Japan duty regime

MFN tariffs on a mix of ad valorem and specific rates. Preferential rates under CPTPP, RCEP, Japan-EU EPA, Japan-US Trade Agreement, Japan-UK CEPA and ASEAN JAEPA.

Customs notes

· Japan uses a 9-digit Statistical Code (HS 6 + 3 national digits) administered by Customs and METI.
· NACCS is the electronic customs declaration system used at all ports and airports.
· AEO (Authorised Economic Operator) status gives fast-track clearance and deferred duty payment.
· Consumption tax base = CIF + customs duty. Registered importers can reclaim JCT as input tax.

Frequently asked questions

What is the typical import duty on metals (HS 7219) into Japan?

Japan applies an MFN duty of about 5% on HS chapter 7219 at the 6-digit line. National tariff schedules add 2–4 further digits, so the exact rate can shift once you confirm the 8- or 10-digit code. Preferential rates under FTAs (MFN tariffs on a mix of ad valorem and specific rates) may reduce this to 0% for qualifying origins.

How is JCT calculated on imports of metals in Japan?

Japan charges JCT at 10% on the CIF value plus duty. Consumption tax on CIF + duty

What is the landed cost of a USD 120,000 FOB shipment of metals into Japan?

On a USD 120,000 FOB parcel with ~8% freight and 0.5% insurance, CIF works out to USD 132,000. Applying 5% duty and 10% JCT brings total taxes to about USD 20,460 (~15.5% of CIF). Landed at buyer's warehouse ≈ USD 154,860.

Which HS code should I use for metals in Japan?

Start with the 6-digit international HS heading - for example 7219.13 (SS hot-rolled coil, thickness 3-4.75mm). Japan customs then requires the full national code (8- to 10-digit national tariff line). Confirm the exact line with your licensed customs broker before filing.

Which Incoterm is best for shipping metals to Japan?

Most importers into Japan prefer CIF or CFR for sea freight so the seller arranges main-carriage transport, while retaining control of destination clearance. DDP shifts import duty and JCT to the seller - attractive to buyers but often priced with a risk premium. Compare all 11 Incoterms with our Landed Cost by HS & Country tool.

What documents does Japan customs need to clear HS 7219?

Japan uses a 9-digit Statistical Code (HS 6 + 3 national digits) administered by Customs and METI. Regulated commodities may also require a health certificate, phytosanitary certificate or import licence depending on the exact HS line.